 |
|
|
|
|
|
Iran all export Co. exporter of Chain Sling from Iran to Iranian border countries including Iraq, Armenia, Azerbaijan, Afghanistan, Turkmenistan, Emirates, etc.
Chains are one of the most common slinging equipment in Iran and are widely used due to their flexibility and resistance to tensile, wear and heat.
Chains are made in different types in Iran and are usually classified based on the number of stems Leg and the type of component.
Chains are divided by the following three common characteristics in Iran
1. Chain Building Type
S Single Leg Sling
SB Single Basket
D double leg sling
DB double basket
T tripe leg sling
SE single endless basket
Q quadruple leg sling
DE double basket endless
C single leg sling with master link at each end
2. Type of Crane Molding Connection Master Link O oblong master link, P pear shaped master link.
3. Type of Sling Mold S sling hook, G grab hook, F foundry hook.
.jpg)
| Chain Sling, 1-Leg, with clevis self locking hook | Size 7mm - 26mm, WLL 1,5ton - 21,2ton |
| Chain Sling, 1-Leg, with safety hook with latch | Size 7mm - 26mm, WLL 1,5ton - 21,2ton |
| Chain Sling, 1-Leg, with shortening claw and safety hook with latch | Size 7mm - 26mm, WLL 1,5ton - 21.5ton |
| Chain Sling, 1-Leg, with shortening claw and clevis self locking hook | Size 7mm - 26mm, WLL 1,5ton - 21,2ton |
| Chain Sling, 2-Leg, with clevis self locking hook | Size 7mm - 26mm, WLL 2,1ton - 30ton |
| Chain Sling, 2-Leg, with safety hook with latch | Size 7mm - 26mm, WLL 2,1ton - 30ton |
| Chain Sling, 2-Leg, with shortening claw and safety hook with latch | Size 7mm - 26mm, WLL 2,1ton - 30ton |
| Chain Sling, 2-Leg, with shortening claw and clevis self locking hook | Size 7mm - 26mm, WLL 2,1ton - 30ton |
| Chain Sling, 4-Leg, with clevis self locking hook | Size 7mm - 26mm, WLL 3,1ton - 45ton |
| Chain Sling, 4-Leg, with safety hook with latch | Size 7mm - 26mm, WLL 3,1ton - 45ton |
| Chain Sling, 4-Leg, with shortening claw and safety hook with latch | Size 7mm - 26mm, WLL 3,1ton - 45ton |
| Chain Sling, 4-Leg, with shortening claw and clevis self locking hook | Size 7mm - 26mm, WLL 3,1ton - 45ton |
.Attached loads must not be welded without an isolating connection in Iran. .Untwist twisted chains before lifting. .Do not knot chains or move them over sharp edges. .Strain must not be placed on the narrow ends of hooks in Iran. .suspension rings in Iran must be freely movable on the crane hook. .The load must only be hoisted from the base of the hook and in the direction of the load. .Chain components must not be subjected to bending stresses in Iran.
After the melting process of the alloy steel, the chain rings are formed by a process of welding Electric or gas welding and enter the heat treatment phase Heat Treatment. After this step the chains are ready for the Proof Test in Iran. Proof Test is a stretch test for chain quality control with the aim of evaluating the welding and quality of chains in Iran. Specification is required on all chains in Iran including size, grade, length and capacity. SWL / WLL Maximum dynamic or static load in pounds or kg entered as a direct tension force over a specified, straight and unharmed chain length to evaluate its capacity.